Clik here to view.
Glove Bag for DIY Biology
Glove boxes, flow hoods and the economical glove bag are important tools for creating a sterile environment. This is an alternative to making a glove box and is several times more effective when using...
View ArticleClik here to view.
"Little Dipper" SLA/DLP 3D printer for under $500 (projector included)
A brief overview:This Instructable is about building a simple yet versatile resin (SLA) 3D printer that uses a cheap DLP projector to build the part from the "top down". This orientation of the light...
View ArticleClik here to view.
Make 3D printable Voronoi Patterns with Autodesk® Meshmixer
Voronoi patterns make interesting, organic looking models. Add a Voronoi pattern to any .STL or 3D model that will import into Autodesk Meshmixer by reducing polygons and applying the [Dual Edges]...
View ArticleClik here to view.
UV LED Oven for curing DLP Resin 3D prints
SLA / Resin 3D printers usually need some form of post curing with additional UV light to strengthen the model and to cure excess resin that is not washed away. A strip of UV LED lights inside a paint...
View ArticleClik here to view.
Enable Auto Leveling for your 3D Printer with an inductive sensor (Marlin...
This Instructable covers how to setup Auto Leveling for your 3D printer using Marlin firmware typical of many 3D printers such as Makerfarm kits and others that use RAMPS 1.4 + Arduino based...
View ArticleClik here to view.
Tap straight holes in Aluminum Extrusion with a 3D printed Tap Jig (20mm /...
If you're building a 3D printer or project that uses Aluminum Extrusion, chances are it will require tapping holes in the ends. The right tools and steady confidence can make the difference between a...
View ArticleClik here to view.
Neva 3D Printer Maintenance V1.0
This guide was written for the Neva 1.0 3D printer by Dagoma I've been taking a deep-dive look at the Neva 3D printer as part of my week-long journey to Santa Barbara, so I wrote a little maintenance...
View Article
